Jenfitch's EPA-registered product JC 9465 is an algaecide and biocide that can help improve water quality in countless applications. By eliminating algae and biofilm, it addresses two of the most persistent challenges in water treatment.
The ORP standard for safe water
The World Health Organization advises that for water quality to be safe from all microorganisms, it must have an ORP above +700mV. Oxidation-reduction potential is a direct measure of a solution's disinfecting power, and reaching this threshold is the benchmark for microbiologically safe water.
Speed of disinfection
At an ORP above +700mV, JC 9465 achieves a 6-log removal in only 10 seconds. By comparison, chlorine requires over 30 minutes to achieve a 4-log removal.
JC 9465 achieves a 6-log removal in only 10 seconds, compared to chlorine's over 30 minutes to achieve a 4-log removal.
Case studies
California water plant
An influent sample at a California water plant was treated at a 10 ppm dosage, demonstrating JC 9465's effectiveness on real-world source water.
Martinez, California potable water plant
At the Martinez, California potable water treatment plant, treatment with JC 9465 delivered a range of measurable benefits:
- Improved filtered water turbidity
- Lower chlorine consumption
- Reduced THM formation
- Longer filter run times
- Lower treatment costs
Why it matters
By combining a high oxidation potential with rapid kill times, JC 9465 gives operators a way to control algae and biofilm while reducing chemical use and byproduct formation, improving both water quality and operating economics.
Have a water challenge like this?
Talk to Jenfitch about JC 9465, safety data sheets, or scoping a treatment program for your facility.
Contact Us
